Contact Us
Product Features
● Potentiometer or Hall sensor
● Modular installation, easy to install
● With a set of switch 125V5A,250V3A
● 0-10V modular control
Application
C1 are mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
Storage temperature | -50℃~+80℃ |
Operating temperature | -40℃~+80℃ |
Protection grade | IP64 |
Vibration | Amplitude ±3g, frequency 10Hz-200Hz |
Shock | 20g, 6ms, Semi-sinusoidal |
EMC anti-interference rank | 100V/m, 30MHz-1GHZ, 80%Sine-wave modulation, meet EN 0082-2 (1995) standard |
EMC emission rank | Rank B, 150KHz to30MHz, meet EN 50081-2 (1993) standards |
ESD anti-interference grade | Rank 4, 8kv contact discharge, 15kv air discharge, meet IEC 61000-4-2 standards |
Operation Strength | 15N(50N max) |
Operation angle | About 25 ° |
Mechanical life | 5 million |
Mechanical error | 0.5° |
Hall | Power supply voltage | 5±0.5VDC |
Power consumption of current | 6.5 mA/hall sensor | |
Resolution ratio | Infinite | |
Maximum voltage | 15 VDC | |
Reverse polarity maximum voltage | 14.5VDC | |
Load resistance | 5KΩ | |
Potentiomete | Power supply voltage | DC24V |
Power supply current | <20mA | |
Resolution ratio | Infinite | |
Resistance (10%) | 2KΩ,5KΩ,10KΩ | |
Electrical angle | 60° | |
Output voltage range (relative voltage) | 0~100%;10~90% | |
Potentiometer maximum load of voltage | 32VDC | |
Maximum power consumption (25 ℃) | 0.25W | |
Switch direction | Switch position ±3° |