Contact Us
Multi-axis finger operated joystick
Product Features
● Dual-axis finger operated, spring return
● With center tap potentiometer angle detection
● 2mA maximum current directional switch
● Proportional amplifier to direct drive hydraulic proportional valve optional
Application
Typical application on remote control box, off-highway vehicle
Travel angle | ±32º |
Operating type | Spring return,dual-axis arbitrary directional operated |
Breakout force | 3.8N |
Operating force(max) | 12N |
Maximum allowable force | >300N(>160N,H handle) |
Expecting life | >2 million cycles |
Weight | 125g |
Power supply | <36Vdc |
Total resistance | 5 KΩ |
Electrical angle | ±30º |
Center tap voltage | 48%~52% (Percentage of power supply) |
Center tap angle | ±2.5º |
On-load voltage (max) | 32Vdc |
Allowance maximum power dissipation | 0.25W (25℃) |
Directional switch | Load capacity: 2mA@30Vdc (Resistance load) |
Breakout angle: ±3 º~±5º | |
Contact resistance: <200Ω |
Operating Temperature | -30℃~+70℃ |
Storage Temperature | -40℃~+85℃ |
Protection level | IP65 (above the flange) |
type | SJ11 - □□ - □□ - □□ |
Code | ① - ② - ③ - ④ |
1. Product type
FJ11 series joystick,5KΩ center tap potentiometer , 2mA directional switch, spring return,
installation dimension 45mm*45mm
2. Operating type
1A | Spring return, single-axis forward and backward directional operated |
2AC | Spring return, dual-axis arbitrary directional operated(with guide groove) |
3. Output Signal
P051 | Potentiometer, less than36Vdc power supply,5KΩ center tap potentiometer, 0%-100% output voltage,forward and backward directional switch |
PWM224 | PWM with proportional amplifier current output,DC24Vpower supply ,2-way output |
PWM424 | PWM with proportional amplifier current output,DC24Vpower supply ,4-way output |
PWM212 | PWM with proportional amplifier current output,DC12Vpower supply ,2-way output |
PWM412 | PWM with proportional amplifier current output,DC12Vpower supply ,4-way output |
4. Handle
S | Without button |
L | Without button |
H | With button |
Connector | Function |
1 | Switch common terminal |
2 | Forward switch |
3 | Backward switch |
4 | Potentiometer wiper |
5 | Potentiometer terminal A |